Unlike simple functions such as adjusting the volume of buzzer, there are others, such as port blocking activation , which is to be activated to enter the programming mode and access the table of basic and advanced functions.

To change advanced models of alarm cobra series Globe (G-G-3193 or 3198) will have to enter the programming mode.

Follow this procedure to enter the programming mode:

It is necessary that the alarm system is turned off, the door and the bonnet are open and that the picture is on (ignition on without the engine running.) Hold down the button command of all alarme.Se conditions described previously were respected the LED placed inside the vehicle lights and about three seconds after the indicators indicate that entered the table through an intermittent buzzer.

To move to the next table and turn off the alarm system will indicate ignição.O by two flashes of the turn signals that came in the function table base, this statement is repeated every 10 seconds to remember the table where he is.

If you want to access the table of advanced ignition off and on over a vez.O system confirms the change table by three flashes of the turn signals.

How to enable / disable function

In the respective table, press button A command alarm and place it on the line you want to enable / desactivar.Uma LED flashing quickly indicates that the function is disabled, slow blinking light indicates activa.O number of flashes corresponds to the number of row of the table of functions where you are.
To enable / disable a function, press the B button of the command.

To exit the program just close the bonnet of the vehicle.

Table of basis functions:

Table of advanced features:

The dark background indicates the factory setting.

I hope this article helps you to program the functions of your alarm charges.

Read also these articles:

• Schedule alarm functions G100 series