It sometimes happens that we got to the vehicle and command alarm stopped function.This now as we turn off the alarm without a command.
To turn off the alarm system without using the remote control, do the following:
-Press the button that is led in the number of times corresponding to the first digit of your pin code . Each time you press the button, the LED will respond with a wink rápida.Uma long pause will be interpreted by the system and the end of the first digit, is signaled by the LED with a long flash.
-Repeat for the following digits of your pin code.
-When you finish entering all the digits, if the code is correct the alarm system goes off.
This procedure applies to alarm the latest models to older models if you need to turn off the alarm without a command will open the bonnet, look for the alarm siren and off it with a small key assigned to it when purchase.
He knew that the button is in the LED will turn off the alarm without a command?
If you liked this article share it with your friends on Twitter or Facebook. I appreciate that. 
Read also these articles:
 |  |
 |  |
 |  |
12 Responses to "Turn off the alarm without a command"
Hello was good to see the site and can not find an answer to my problem I bought a new car that already came with a cobra alarm installed now had the car stopped half a year and deactivated the alarm with pin code but now I could not connect the alarm.
He asked the favor if I could ever help solve this problem.
Since already many thanks
No more cordial greetings
Vasco Jorge
The alarm is not turned off by the pin code when you're playing, when it does not disable the alarm.
The alarm has command? The car has a battery? If yes to both, check the stack of command and if necessary reprogram it .
Hope this helps.
Good afternoon,
I lost the command key and alarm now have to be with the battery because when I turn off and get into the car it starts beeping and will not let me start the car, how can I solve this problem??
would appreciate help if possible, thank you.
Good afternoon,
If you are not the key is more complicated, I recommend talking to an electrician for you to turn off the alarm and re-cut the links of ignition.
Then you have to send the alarm for technical services, had to do, because it does not play with the battery because the battery is disconnected from the self powered siren gone.
I'm sorry but I can not detail a solution without compromising segurança.Mesmo who believes that is not to rob a car, teach how to make potential thieves.
Cumps
Good evening, I have a renault espace III that the game brings a cobra alarm, with the command until the aki alarm opened and closed the door, but two days left down here to do, I thought it would be the battery, swapped the open stack, but nothing remains without trabalhar.Como bought space on the 2nd hand and it carried with it a few books, do not even know the model of alarm or pinna.
Do you have any, so you can know any of these things through the alarm or command of the installation itself?
Thank you, good night
The back of the alarm's command has four numbers, anyone know what they are?
Thanks again.
good night ... I bought a Nissan 200SX s13 92 and provides an alarm cobra 3195 qdo gave her first bath pla put the car to work and a few minutes after the alarm went off and did not receive orders from the command ... you will know the factory code for mha luck trying to shut it down??
by mail or so! required attention pla
Good day, if possible help me in this problem, I have a Ford Fiesta 1.4 TDCI I bought new in 10/2009 and asked them to come with factory alarm and applied them to a COBRA CAN BUS, but when it's windy and how it triggers and the command key, I will introduce you to the code to disable, he can not stay off because when I leave the car and closing it again is bound still can not understand how to deslingam velometria sensors, which I think and why he dispara.obrigado and congratulations for your instructions which I think are very instructive.
The code does not disable the alarm, simply turn it off when it is not possible via the command.
but this e q desligalo I want to try and find the cause of activation or the command to set the alarm ... the game has no protection to enable the engine was running and what happened! ta the alarm to function as it should be 'cause the doors close and he is silent but the command does not see anything? measured the cell is 2.9 v command and the game feel so good!
Try to reset the command
After turning off the alarm after he touched count the LED flashes, they indicate the reason for the alarm playback.
Comments